Eureka 1201 Rider Sweeper
The Rider 1201 ride on sweeper is a combination of technology and ideas which enables all operators to keep large industrial and commercial areas perfectly clean, working in total comfort, quickly and at low cost.
With a maximum sweeping path of 1.200 mm with 2 optional side brushes, combined with the operational speed delivers a large cleaning capacity of up to 10.140 m2/h.
The compact 1201 ride-on sweeper, with a turning radius 1,000 mm makes it particularly suitable for sweeping in narrow confined areas not accessible by larger machines. The 1201 has large filter area (4 m2) which enables sweeping in the dustiest of environments & can cover a full shift on a single charge. The Rider 1201 sweeps the floor more accurately and efficiently, controlling the dust that would be lifted by manual sweeping.
Total visibility and easy entry/exit from both sides allow the operator effortless access to narrow spaces. The tough metal structure, combined with the epoxy-painted chassis, means additional protection against bumps, collisions, and better defences against scratches or rust.
Controls are simple and ergonomically located for easy operation, a single pedal controls the forward and reverse drive. Levers lower & raise the main and side brushes are located on the dashboard, as well as the electric filter-shaker control & vacuum cut off device which is used when sweeping in wet conditions.
Large Debris Flap
The debris flap runs the width of the sweeper, this can be lifted by the operator with a foot pedal whilst driving to allow larger debris to be collected.
The retractable anti-shock side brushes allow maximum cleaning efficiency on rough or uneven floors & edges, mounted on shock absorbers for a longer life.
Allows cleaning of edges, ledges & areas not accessible. Ideal for vacuuming racking, shelving & entrance matting.
Quick Change Brooms
The floating, self-levelling main brush can be quickly adjusted or replaced without need of tools. The MultiBristle main brush, which has a width of 70 cm, includes a fine bristle section for fine dust, and a heavy bristle section for larger debris.
The powder coated steel debris hopper is mounted at the rear of the machine, with a transport handle & wheels for easy emptying.
Large Drive Wheels
Picobello 151 is mounted on large rear wheels with self-greasing bearings for better manoeuvrability & control over rough terrain.
The battery operated version ensures a superior running time, for extra productivity. Maintenance access is convenient, the top lifts up to expose the engine, battery compartment, motors and other service areas.
1201 Steel Line
Heavy duty option for more industrial applications.